← Back to Trident Build homepage

Trident Build · Research

November 4, 2026 · Featured research

Project 001 — Engineering Research Report (Stage 12)

Trident Build has assembled a traceable synthetic engineering evaluation covering mission execution, offline behavior, simulated plumbing leak detection, return-to-start modeling and electrical-inspection planning.

Trident Build plans to benchmark its computational simulations against real quantum computing hardware and classical computing systems, and compare the findings with independently measured results from physical construction applications, including electrical infrastructure, water piping, and plumbing systems. These benchmarks and physical tests are planned, not completed.

Download Project 001 Engineering Research Report (PDF)

Engineers, researchers and potential collaborators are invited to review the findings and share constructive technical feedback at contact@keithlouis.net.

Simulation and planning records only. No physical rover trials, quantum-hardware benchmarks, independently verified field detection performance or operational certification are claimed. Trident Build · Tampa, Florida, USA.

November 3, 2026 · Research update

Construction Research — Project 001: Part I Completed

Trident Build has completed Part I (Stages 1–8) of its computer-based construction automation research, covering simulated autonomous inspection scenarios, safety considerations, and documentation. These are simulation findings, not physical equipment validation.

Stages 9–12 have produced additional simulation-based engineering assessment and a proposed validation plan. Physical testing remains a future phase.

Read the construction Part I public summary (PDF)

The research described is computational and documentation-based; no physical rover validation is claimed.

November 3, 2026 · Research update

Industrial Plumbing — Water-Leak Quantum Simulation

Trident Build has completed a simulation-based investigation of industrial plumbing water-leak classification using synthetic data. A set of 80 two-qubit quantum circuits has been prepared for independent research evaluation.

The proposed comparisons will include real quantum computing hardware and classical computing systems, with later physical validation. No such hardware benchmark or field trial has been completed.

Read the public research summary (PDF)

This is computational research, not a field-tested leak-detection system. No actual quantum hardware measurements or quantum advantage are claimed.

November 2, 2026 · Research documentation

Timing and Communications Concepts

Educational software illustrations of assumed clock drift and BB84-inspired communications concepts. No physical atomic clock, quantum channel or security validation was performed.

Download branded Timing and Communications Concepts (PDF)

Environmental research

Environmental Monitoring and NOAA Water-Level Study

Software demonstrations and a coastal water-level analysis, with limitations and next steps documented in each report.

Environmental Monitoring Simulation (PDF) · NOAA Coastal Water-Level Study (PDF) · Detailed NOAA Experiment 4

November 2, 2026 · Research update

Electrical Motor Simulation

Download Electrical Motor Simulation research summary (PDF)

Trident Build continues simulation-based research into electrical motor applications and potential automation in the electrical trades. The simulated quantum-circuit results are being prepared for comparison with results obtained from an actual quantum computer to support independent validation of the simulation.

Research overview

Trident Build is investigating environmental modeling, coastal water-level analysis, and potential future stormwater and infrastructure monitoring applications. The work below documents a computational sensitivity experiment, not a deployed monitoring system.

Completed research

Experiment 3 — source-data preparation. The Experiment 4 notebook identifies a NOAA measured-water-level CSV supplied from Experiment 3. The earlier experiment’s full methodology and conclusions have not yet been independently reviewed for this page.

Experiment 4 — held-out water-level anomaly simulation. The detailed record follows.

This simulation-based study is not evidence of a field deployment, quantum hardware experiment, or verified operational detection capability.

Experiment 4: Why better sensors alone won't fix water-level anomaly detection

We tested whether a simple tidal model could flag 22 cm water-level anomalies in real NOAA data. It couldn't, and halving sensor noise didn't help. The limiting factor is the environmental model, not the sensor.

Conducted October 31, 2026 · Data: NOAA CO-OPS, St. Petersburg, FL (station 8726520), October 16–29, 2026 · Fully reproducible notebook
16.5 cm
Average baseline error on held-out hours
39.6 cm
Alarm threshold needed to suppress natural false alarms
0.5%
Event hours detected at conventional noise (0% at half the noise)
4 of 101
Held-out hours that crossed the threshold with no event at all

What we set out to test

Stormwater and coastal monitoring systems need to tell a real event, such as a blockage, surge or discharge, apart from normal tidal and weather variation. A common approach is to predict the expected water level and raise an alarm when the measurement departs from that prediction by more than a threshold.

Experiment 4 asked two questions. First, how well does a simple tidal model predict water levels it has never seen? Second, if we inject known anomalies, does lower sensor noise make them easier to detect?

How we tested it

The baseline misses a lot of real variation

Measured water level vs. train-only tidal prediction (cm)

NOAA measuredModel predictionHeld-out period
The prediction tracks the tidal rhythm but misses swings of 20–45 cm, especially in the held-out period, when weather and surge effects dominated.

Held-out residual: measured minus predicted (cm)

ResidualAlarm threshold (±39.6 cm)
With no event injected at all, the natural error crossed the alarm threshold in 4 of 101 hours. To avoid constant false alarms, the threshold had to be set well above the 22 cm events we wanted to catch.

Detection results

Scenario (500 trials each)PrecisionRecallFalse-alarm rate
Conventional sensor noise (10 cm)1.5%0.5%4.7%
Lower sensor noise (5 cm)0.0%0.0%4.6%

Averages across trials. Recall is the share of the 14 event hours that were flagged; the false-alarm rate is the share of the 87 non-event hours that were flagged.

What this means. Reducing sensor noise did not improve detection, because sensor noise was never the bottleneck: the error in the environmental model was. A 22 cm event is invisible when the model is off by about 16 cm on average and by up to 45 cm. Any claim that more precise sensors improve anomaly detection must first show a baseline accurate enough for that precision to matter.

Research directions (proposed, not completed)

Potential follow-up work includes field-grade ultrasonic sensing integration, stormwater and drainage observations, independent event labels, and comparison of conventional and advanced computational approaches. Any Amazon Braket quantum simulation or hardware results will be described separately only after execution records and findings are verified and the findings are verified.

What comes next

Limits of this experiment

This test used coastal water-level data, not stormwater flow. The anomalies, sensor channels and noise levels were simulated, and the four channels are replicas, not separate stations. No quantum hardware or advanced clock was used, and no claim of quantum advantage is made or implied.

Reproducibility

The analysis runs in a single notebook using a fixed random seed (20261031). The notebook, the hourly baseline predictions and all 1,000 trial results are available on request.

Data table: hourly measured and predicted water levels

© 2026 Trident Build Inc. NOAA water-level data courtesy of NOAA CO-OPS.